DODGE WSTU-SCED-50M Mounted Units & Inserts

d:70.000 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:125000 N; Basic Dynamic Radial Load Rating C:153000 N; Accessories:Two Seals; D:150.0000 mm; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.00 mm; B:63.50 mm;

H:317.5 mm; R1:95.25 mm; Max. speed for PosiTrac Plus seal:1075 r/min; P60°:394 kN; J max.:463.55 mm; R2:39.688 mm; PosiTrac Plus contact element:2 x B10724-125; P90°:236 kN; Cap bolt:7/8-9 UNC; da:130.175 mm;

Infection On SoilPhysiological NeutralChemical CharacterChemical NeutralRaw MaterialManure, for All CropsTypeCommercial Organic FertilizerTrademarkQFGTransport PackageBottle or BarrelSpecificationappearance: Clear and transparent greenOriginChinaGrease Speed Rating n11800 rpmAccessoriesTwo

Cap bolt, SAE grade:5; L:539.75 mm; J max.:463.55 mm; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 14; h:60.325 mm; RG:3/4 NPT; Cap bolt:4 x 3/4-10 UNC; Ca:95.809 mm; ba:67.469 mm;

Static (Coa):3410 kN; d2 (max):0 mm; Dynamic (Ca):2190 kN; s:10 mm; d2:280 mm; b1:0 mm; D:500 mm; Pu:276.450 kN; E:0 mm; F:330 mm;

Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4600 rpm; Oil Speed Rating n2:6000 rpm; Basic Dynamic Radial Load Rating C:108000 N; d:65.000 mm; B:33.00 mm; D:140.0000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:86500 N;

db min.:236 mm; Ba min.:10 mm; Calculation factor Y0:2.2; Mass bearing + sleeve:131 kg; da max.:270 mm; D:460 mm; Calculation factor e:0.3; Basic dynamic load rating C:2844 kN; B4:35 mm; Calculation factor Y2:3.4;

Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:88000 N; Sealed Speed Rating n3:4300 rpm; Basic Dynamic Radial Load Rating C:78100 N; Accessories:Shield & Seal & Snap; B:38.10 mm; D:110.0000 mm; Grease Speed Rating n1:3800 rpm; d:60.000 mm; Fillet Radius ra:1.50 mm;

b1:11.5 mm; C:55 mm; r2 min.:1 mm; B:85 mm; Da max.:153.3 mm; b:11.5 mm; D:160 mm; r1 min.:1 mm; Basic dynamic load rating C:655 kN; Sealing solution:Triple-lip seals;

Mass adapter sleeve assembly:3 kg; Hydraulic nut:HMVC 24E; Lock washer:W 24; B4:23.825 mm; Lock nut:AN 24; Sleeve:S 24x4.1/16; Threads per inch:12; d1:103.188 mm; G:119.786 mm; B:20.904 mm;

B:69.85 mm; J max.:139.7 mm; H2:30.163 mm; S:0.794 mm; A1:72.231 mm; s:25.4 mm; Limiting speed:6000 r/min; d2:62.706 mm; H1:47.625 mm; J min.:119.063 mm;

Mass needle roller and cage assembly:0.008 kg; Fatigue load limit Pu:1.6 kN; Limiting speed:24000 r/min; Ew:23 mm; Basic dynamic load rating C:9.13 kN; U:13 mm; Reference speed:20000 r/min; Basic static load rating C0:13.7 kN; Fw:19 mm;

b1:mm; B:98.42 mm; r1s (min):6.3 mm; Pu:125.260 kN; D:290 mm; d2:160 mm; b:mm; s:10 mm; d2 (max):mm; F:194 mm;

d:440 mm; D1 ≈:556.3 mm; Fatigue load limit Pu:1600 kN; Basic static load rating C0:19600 kN; D:620 mm; B:450 mm; C:450 mm; F:487 mm; α:20 °; K:9 mm;

Da max.:261.4 mm; B:58 mm; d:130 mm; Limiting value e:0.2; Axial load factor Y:0.6; D1 ≈:235.2 mm; da min.:147 mm; r1,2 min.:4 mm; d1 ≈:181 mm; Angle ring:HJ 326 EC;