FYH PF205 Bearings

Dimension B2:0.720 in; Series:Standard; Radius r:0.6 mm; Bearing Type:Ball Bearing; Outside Ring Width C:22.000 mm; Lubrication Type:Non-Relubricatable; Shaft Size d:2 in; Angle between Set Screws:90 º; Seal Type:Molded Shroud; Dimension B1:1.72 in;

Type:Bearings with Housin; Shape:Flanged Pilot Type; Days to Ship:7 Days; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing Part Number:608; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Volume Discount:Available

Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L :12-19/32 in; Cr - Dynamic Load Rating:58051 lbf; Dimension H :3-3/4 in; Dimension J1 :11 in; Series Type:Medium Series; Maximum Speed:3080 rpm; Shaft Size:3 in; Dimension J2 :9-7/8 in; Bearing Number:MSE300BR;

Cg - Geometry Factor:0.0668; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cup Part Number:14283; a - Effective Center Location3:-4.3 mm; Db - Cup Backface Backing Diameter:59.94 mm; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; d:31.750 mm; Y - ISO Factor9:1.57; Cage Type:Stampe

C - Cup Width:1.2500 in; D:5.8437 in; e - ISO Factor2:0.49; r - Cup Backface To Clear Radius1:0.130 in; Cup Part Number:42586; Series:42000; Db - Cup Backface Backing Diameter:5.24 in; Da - Cup Frontface Backing Diameter:5.67 in; Design Units:Imperial; Cg - Geometry Factor:0.139;

Dimension P:1.0 in; Cor - Static Load Rating:131513 lbf; Seal Type:Kevlar Packing Seal; Bearing Type:Split Cylindrical Ex; Maximum Speed:1570 rpm; Note:This product line wa; Dimension R:15.1 in; Bearing UPC:013992028518; Cr - Dynamic Load Rating:94869 lbf; Shaft Size:135 mm;

Fatigue limit load, Cu:1.52 kN; Static load, C0:33.5 kN; Brand:NTN; Ca min:5.13 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:CN; D4 max:121.6 mm; Dynamic load, C:39.5 kN; a max:2.87 mm; Min operating temperature, Tmin:-20 °C;

Symbol of Bearing Ring Shape:No; Rolling Element Material:Steel; Clearance sign:No; Load Direction:Radial; Rolling Element Material:Steel; Specifications:Standard; RoHS:6; Material Symbol:No; Load Direction:Radial; Retainer Type:Momi removing;

Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load; Bearing Unit, Type:Square flange shape; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):36200; Bearin

Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flange Type; Bearing Part Number:6201; Number of Bearings:Single; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):56; Type:Bearings with Housin;

A2:87.6 mm; T max.:200 °C; N:23mm; Weight:8.72 kg; Recommended tightening torque for set screw:27.1 Nm; S:34.1 mm; A:63 mm; A1:24 mm; J:175 mm; G:M10x1;

Y - ISO Factor3:1.8; Db - Cup Backface Backing Diameter:4.29 in; C - Cup Width:1.3386 in; Design Units:Imperial; Cup Part Number:H212710; D:4.8809 in; Series:H212700; r - Cup Backface To Clear Radius1:0.140 in; e - ISO Factor2:0.33; Da - Cup Frontface Backing Diameter:4.67 in;

Shape:Bottom Mount; Number of Bearings:Single; Shape:Bottom Mount; Lateral Width L(mm):38; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):10; Housing Material:[Aluminum Alloy] Alu; Holder Surface Treatment:Clear Anodize; Width T(mm):15;

d:45 mm; ra max:1 mm; d1:54.5 mm; da min:51.5 mm; Characteristic cage frequency, FTF:0.4 Hz; D1:75.6 mm; Min operating temperature, Tmin:-20 °C; Da max:78.5 mm; Static load, C0:20.4 kN; Characteristic inner ring frequency, BPFI:5.38 Hz;

Unit, Type:Plummer Block; Surface Treatment:No; Unit Body Material:Gray Cast Iron (FC 2; B:112; Plummer Block Dia., Type:Standard Shape; Unit, Type:Plummer Block; Width a(mm):345; Bearing Inner Dia. Shape:Cylindrical Bore; Length b(mm):100; Unit Body Material:Gray Cast Iron (FC 2;